Product Introduction：

1. The Digital display chip and LCD display screen, the test is more accurate, more reliable, and cost-effective.
2. Four test units: PSI, BAR, KPA KG
3. The button battery can be replaced.
4. Streamlined appearance design, more exquisite.

Specification:

●Range: 0-150PSI or 0-10 Bar or 0- 10 Kgf/cm* or
0- 1000 Kpa
●Display: 21 * 10mm LCD display
●Power:LR44 button battery
●Operating temperature:-5 ~50'C
●Reduce tire wear and extend tire life
●Increase fuel efficiency
●Improve vehicle handling and safety
●Range:0-150PSI or0-10Bar or 0-10 Kgf/cm'or 0- 1000Kpa。LCD Light demonstration。Automatic shut-off. Engineering plastics shell

Helpful Hints:

●0 Press the "ON/UNIT/OFF" button. Wait for "0.0" PSIor "0.00" Bar or "0.00" Kgf/cm2 or "0" Kpa display and bleep sound.
●Place the nozzle of the gauge over the tyre valve. Press firmly toensure a good seal and prevent air escaping.
●Hold the gauge on the valve until the reading on the LCD display locks.
●Remove the gauge quickly from the valve and read the pressure.
●To retake the reading, simply place the nozzle over the tire valve again and repeat.
●The Gauge will automatically shut off 20 or 60 seconds after use. Gaugecan be manually turned off by holding the"ON" button down for more than 3 seconds.
●In order to get a good seal, please put the tire's air nozzle was up or off to the side.
It's best when the nozzle is around the 6 or 7 o'clock position so that you can firmly press the gauge straight down. This means you have to crane your head a bit to read the digital measurement, but the important thing is to be able to press down straight & hard onto the tire's nozzle

Packing list:

1*Digital tire pressure gauge (TG105, TG205, R-6802 optional)